Metro News Release

For immediate release: July 1, 2009

Statement from Metro General Manager John Catoe on the Second Update from the NTSB Investigation into the June 22 Red Line Train Collision

FAQs related to train accident

First and foremost, I want to assure our riders that the Metrorail system is as safe as it can be. We have been working with the NTSB to find the root cause of this tragic accident. And riders will continue to experience delays on the Red Line until we find the cause. We apologize for the inconvenience, but this is critical to gaining a full understanding of why this happened and then taking whatever steps are necessary to ensure that this kind of tragedy doesn’t happen again.

Our testing has resulted in our being able to replicate the problem, but not isolate the specific cause. We know the problem is in a track circuit. We could just replace the parts, but we need to understand what caused it. You don’t just change the parts. We must find the cause.

We have conducted computerized analytical tests, which the NTSB has referenced as “track circuit data.” The data establishes a profile of what’s taking place electronically in the rail system. These tests are normally conducted monthly. What we found during a special review of the data after the accident was that the track circuit periodically lost its ability to detect trains. This is not an issue that would have been easily detectable to controllers in our operations control center. What the analytical profile showed was that the track circuit would fail to detect a train only for a few seconds and then it appeared to be working again. This happened after we had replaced an “impedence” or “weezie bond” for the track circuit for where the accident occurred. The device communicates information such as speed and distance between the tracks, trains and operations control center. The device was replaced as part of Metro’s normal track rehabilitation program. We are now running analytical reports on the rail system daily instead of monthly and system wide. We have found no other similar issues with track circuits in the system.

Again, I want to stress that we will do everything we can to find the cause of this accident, and from what we have discovered so far it appears to be a freak occurrence.

###

Media contact for this news release: Lisa Farbstein or Candace Smith at 202-962-1051.
For all other inquiries, please call customer service at 202-637-7000.

News release issued at 4:51 pm, July 1, 2009.